EVALUASI PENERAPAN KESELAMATAN DAN KESEHATAN KERJA (K3) PADA PROYEK PEMBANGUNAN PASAR SINGAMANDAWA TAHAP I

I Kadek Bayu Widiantara; Ida Ayu Putu Sri Mahapatni; I Made Harta Wijaya

doi:10.32795/widyateknik.v19i2.5857

I Kadek Bayu Widiantara Program Studi Teknik Sipil, Fakultas Teknik, Universitas Hindu Indonesia
Ida Ayu Putu Sri Mahapatni Program Studi Teknik Sipil, Fakultas Teknik, Universitas Hindu Indonesia
I Made Harta Wijaya Program Studi Teknik Sipil, Fakultas Teknik, Universitas Hindu Indonesia

DOI: https://doi.org/10.32795/widyateknik.v19i2.5857

Keywords: OHS, Evaluation, ISO 45001 : 2018, Construction Project

Abstract

The rapid development of the construction industry in addition to providing benefits also poses risks. The construction industry has quite a big risk and this industry can be said to be the most vulnerable to work accidents. ISO 45001: 2018 can be defined as an International Standard that regulates the requirements for occupational health and safety management systems. This study aims to determine the evaluation and application of OHS according to ISO 45001: 2018 regulations in the Phase I Singamandawa Kintamani Market development project. The type of data used is primary data obtained from distributing questionnaires and interviews as well as secondary data obtained from library sources. Data processing was carried out using Microsoft Excel and SPSS version 25. The type of research used was a combination research that combines qualitative and quantitative research, using 3 techniques, namely antecedents, transcendents, and output. The results showed that the antecedents' techniques of staff and workers stated they were very suitable with an average of 40.00 and 41.08 for the OHS policy and planning implementation stage, that the applicable laws and the commitment and leadership carried out were appropriate because of the -the contractor encourages workers to apply OHS. The averages of 37.09 and 38.04 for the OSH implementation stage are also very appropriate. In the transcendents technique, staff and workers stated that they were very compatible with an average of 34.09 and 34.63 with early identification of hazards and risk control. Whereas for the implementation of OHS, the average is 45.64 and 46.00, very appropriate, because there is supervision according to standards. At the output stage, staff and workers stated that they were very suitable with an average of 18.82 and 18.96 for the OHS performance monitoring and evaluation stage. Based on the results of the evaluation of the application of OHS in the Singamandawa Market development project, it is following ISO 45001: 2018, namely by taking the PDCA (Plan Do Check Action) approach.

Downloads

Download data is not yet available.

References

Adzim, H. I. (2021). Pengertian dan Elemen Sistem Manajemen K3 (Keselamatan dan Kesehatan Kerja). Sistemmanajemenkeselamatankerja.Blogspot.Com.

Badrul, M. (2019). Pengertian K3 Menurut Para Ahli Serta Tujuan dan Jenis-Jenis Bahaya. Badrulmozila.Com.

Ervianto, W. (2002). Manajemen Proyek Konstruksi. Andi offset.

Ervianto, W. I. (2005). Manajemen Proyek Konstruksi Edisi Revisi. Andi.

Ervianto, W. I. (2009). Manajemen Proyek Konstruksi (Revisi). Andi Offset.

Frederika, A., & Astana, Y. (2010). Analisis Keselamatan dan Kesehatan Kerja (K3) pada Proyek Konstruksi (Studi Kasus pada Proyek Konstruksi di Kabupaten Badung). Konferensi Nasional Teknik Sipil 4 (KoNTekS 4), 267–283.

Kani, B. R., Mandagi, R. J. M., p Rantung, J., & Malingkas, G. Y. (2013). Keselamatan dan Kesehatan Kerja pada Pelaksanaan Proyek Konstruksi (Studi Kasus: Proyek PT. Trakindo Utama). Jurnal Sipil Statik, 1(6).

Kemala, D. R. (2017). Pengaruh Keselamatan dan Kesehatan Kerja Terhadap Kinerja Karyawan MHE Maintenance Department Badak NGL di Bontang. EJournal Administrasi Bisnis, 5(1), 1–7.

Sugiyono. (2016). Metode Penelitian & Pengembangan (Research and Development). Alfabeta.